Just wanted to let everyone know that there is a great article about the CriCri. I subscribe to Custom Planes and I don't know if the magazine is available on...
In <bqg75h+a2eu@eGroups.com>, on 12/01/03 ... How about an address and phone number for the publisher??? ... W. David DOIRON <DDoiron"at"cox.net>...
W. David Doiron
DDoiron@...
Dec 1, 2003 11:30 pm
1708
In <bqcmi0+rbrv@eGroups.com>, on 11/30/03 ... If it's in a crate, it's NOT a Cricri. The only crated kits were "Crickets" from Chris Heintz. There are usable...
W. David Doiron
DDoiron@...
Dec 1, 2003 11:32 pm
1709
In <002c01c3b3f2$cab939e0$d80e58db@pavilion>, on 11/26/03 ... Sorry I have been out of town at work again...anyway, The Limbach has a couple of positive...
W. David Doiron
DDoiron@...
Dec 1, 2003 11:48 pm
1710
david, thanks very much for clarifying this and bringing the safety issues to my attention! i will inform my friend. thanks again, carl....
Having recently joined this list, I'd like to say hello to the CriCri group. My name is Gunter Malich, and I live on the south-west coast of Canada, in...
... Don't worry about copyrights, it didn't seem to apply to the Cricri drawings! Best regards Tor ... WebMail fra Tele2 http://www.tele2.no...
tobeide@...
Dec 2, 2003 7:36 am
1713
David, where did you buy your Limbach engines? Did you buy direct from the factory? Did you pick them up yourself? Is there a distributor in the USA? Why did...
In <029701c3b895$66289780$6401a8c0@Gunter>, on 12/01/03 ... Hello Gunter! Glad to hear you got away from the Zenair mods. As a result, you no longer have a...
W. David Doiron
DDoiron@...
Dec 3, 2003 1:55 pm
1715
Hello again, Well I would post the article except that a friend of mine has it currently. He should be mailing it back to me in the near future at which point...
Oops, Sorry guys I mispelled the links. http://customplanes.com http://customplanes.com/contact-us.htm It's like they say,"Garbage in, garbage out." Regards,...
Hello: welcome to cri cri group,im new also in this group,i m asking if you can help me to get MICHEL COLOMBAN e-mail address,please try as much you can. ...
Hello, Mr Michel COLOMBAN 37 Bis rue Lakanal 92500 Rueil Malmaison France He as no email (He said me he have no time for "this") Frédéric Le Thu, 4 Dec 2003...
Hi friends, I am begining to save money for engines, :-), well, my project is frozen again by a "new house incoming...". I have been thinking about two model...
... How much do they weigh??? If they weigh much more than the standard JPX single, then they are too heavy... David Doiron Hi friends, I am begining to save...
David & Diane
DDoiron@...
Dec 6, 2003 12:24 am
1721
Hi david, They are about 13 Kg, exhaust, electric start and battery included, the power is about 22 Cv!, I really prefer the new JPX D-330 but I need to know...
Hello Harry, Although you sent your note to my personal email, I hope you don't mind me responding via the list. I thought your questions might be of interest...
Hi Cri-Cri lovers, I have found a local alloy dealer, what a dream!, but I need to know one thing, the angle with a thickness of 1,2 mm is out of this planet!,...
Hi Pedro, Take a close look at the plans. Some parts can be replaced (elevator spar caps) by 2024 T3 1.6mm angle which can be found. It comes in 16mm width....
Pedro, What Terry did is what I did also. The very small angle is very expensive, the more common larger size just takes your time to get to the proper...
Thanks Vic and Terry, my little problem is the thickness, if the 1,2 mm 2024 angle could be replaced by a 1,5 mm angle, here in Spain, we don´t have the 1,6...
Hi Pedro, Any change from the original design in the UK requires permission. You will have to check with your inspector or contact Michel Colomban to see if...
Hi everyone, Well, let´s go to write a letter to M. Colomban for asking about the change in all the plane the 1,2mm angle fot the 1,6 mm angle, I think that...
Hi people, I have seen this in France: http://www.ulmtechnologie.com/site/docs/catalogue/50000.pdf They have the 1.2 mm T angle and any material needed for the...
... 2024 T351. ... Hi Terry, No difference as far as we are concerned between those specs, it has to do with the way the stress relieving and artificial ageing...
Just to say a big thanks to Gunter for his very helpful info on stall speeds etc. (post 690)Ties in with my Hi-Speed taxi work . I was able to get the...
... Don't wonder. I had a chance to talk to Red, and he said that Chris Heintz insisted on that statement being in there even though it was NOT true! Cricri...
David & Diane
DDoiron@...
Dec 13, 2003 11:08 pm
1735
Anyone thinking of using this package should note that the auxiliary fuel tank is very much not recommended. There are a variety of instructions NOT to put...
