Hello everybody, My name is Eugene, I live in Las Vegas (NV) , end just started to build Cri-Cri from plans.,Horizontal stabilizer all most done. I send email...
In <dcbqar+oo1f@eGroups.com>, on 07/28/05 ... Dear Steve, Welcome. You will notice from time to time the great contempt for Chris Heintz and Zenair on this...
Hi all, I recently, well, last year :-) purchased the canopy mold that Vic Asp had in Seattle. A few canopies had been taken off it while Vic owned it, and I ...
hi david, thanks for the welcome. I do like the Tri-Z. i have had it since 1988 and have about 500 hrs on it. Should be more but somehow work always seems to...
hi david, thanks for the welcome. I do like the Tri-Z. i have had it since 1988 and have about 500 hrs on it. Should be more but somehow work always seems to...
In <dd6da4+knr1@eGroups.com>, on 08/08/05 ... I guess you have not looked at the old threads. Chris Heintz/Zenair sold plans and kits in North America and ...
Hi David, I now own the CriCri NX71AM. It lost an engine and had a hard landing before I bought it, but is in very good shape. I've been flying since 1966 over...
I can only hope that in the many many years since that lawsuit fiasco that Mr. Colomban has mellowed with age. It would be a real shame to see this fine...
Let's see.. 1. A plans-built CriCri does not have the design problem that led to the lawsuit. If the plans and the original design actually good enough to be...
Although I agree with you frustration, I doubt MC can be convinced to sell plans in NA. His issue is with liability in NA that doesn't exist to the same extent...
Sign me up. Bart Ransom P.O. Box 1198 Chewelah, WA 99109 Bob <bbtapb@...> wrote: Let's see.. 1. A plans-built CriCri does not have the design problem...
Hi Wallace, For the carbs try; SODIKART / ITAKA Rue des Imprimeurs Z.A les Hauts de Coueron 44220 COUERON Tel : 02.40.38.26.20 Fax : 02.40.38.26.21 For the...
Hi everybody! I start ordering soma parts from machine shop.Price, just for drawing them in CAD format high...more I will ordered -less it's will cost per ...
I did.And Grove in Calif. made it.They have a print to make them.I think it is in the new catalog.If you call them ask for Robbie.Vic use to have info. on his...
I was sitting at home reasonably bored, and decided if i could make a few cosmetic changes to the cri cri, dont get me wrong, i absolutly love its look, i...
Hmmm... I actually still prefer the original "Bubble Canopy" look. Nice job with the line-drawing alterations though! Gary in Pennsylvania ... From:...
In <de43di+camm@eGroups.com>, on 08/19/05 ... That last one is especially good looking! You would have to do a lot more work to make the complex shape, but it...
In <007001c5a99f$b9d00880$0100a8c0@guessqnrri87kc>, on 08/25/05 ... I never could, but I always had limited altitude and only got to 135mph, and it was time to...
Hi there, New member to the group, looking very closely at building one of these. Have asked for info etc from MC. Need as much info as possible.....One thing...
Hi Woods, Your question is easy, you do, the builder. Happy building Terry ... From: MARK WOODWARD To: CriCri@yahoogroups.com Sent: Friday, August 26, 2005...
Hi David, Thanks for the response. I had a feeling they may be difficult to air start due to the compression. I have found over the years that a good 'Boot...
i suggest your do a good run up to move that air pocket out of the system,,always watch during the run up that air dosnt come back in the line,could be a leak...
Those little Tillotson fuel pumps worry me so I was going to put a single in line electric fuel pump with a smaller diameter (3mm) return line from a ‘T’ ...
Hi Gerard, Thanks for the response. Has there been an amendment to the flight manual? My 'Manuel de Vol' states 260Km/h as VNE. Regards Terry ... From:...
