Look in the files section. Any chance you could take some digital photos of those plans? They can't be bought in North America so we have to get them any way...
I didn't see a construction manual in the files section. As far as coping the plans and putting the files on here, thats a no go unless I hear from the...
What I have is "MAINTENANCE AND FLIGHT MANUAL FOR THE CRICKET MC15" and "CONSTRUCTION TECHNOLOGY MANUAL FOR THE MC15 AND MC100 AIRCRAFT" which is not what you...
If you have the number of your plans, I can send you a set of copies to the cost. Jorge ji_hilton <ji_hilton@...> wrote: I didn't see a construction...
Divinycell should work. I believe it will actually be a bit better: thermal expansion coefficient is a bit better, and the strength/temp properties are a...
Here is another option. http://www.rcshowcase.com/html/RCS/rcs400.html Its a 5 cylinder radial 4-stroke 25 HP. Its a little over a foot in diameter. Four...
There are a couple of other things you should also not like about that radial engine for CriCri use. It is too heavy at 20.3lbs each (if you were going to use...
MM, I was also looking at the DA-150 engines. Do you have any idea what the specific fuel consumption of the DA-150 is? I would like to compare it to the JPX...
I checked out the site you listed. I don't like how the carb is out in the wind. The ZDZ twins have the carb behind the engine so you could minimize the...
Here is another engine that could b used for the cri cri aircraft!!!! http://www.skyengines.com/engine.htm ... From: Jesse Hilton <ji_hilton@...> To:...
The wankel is 50 hp so you would only need one. It would mount in the front like a regular airplane so the carb sticking out wouldn't be that bad. I assume...
Dear Folks, Since this old thread has reappeared, I am resending this response: For the life of me I cannot figure out why there is interest in a "single...
Hello all I want to buy (map and full CriCri) airplane If somebody can help please leave me a message with my persoanl email address at babak_info atsign...
While 'dreamin' just imagine a 'suck and blow' addition (ala Cessna 336) added to existing twin engines giving a 'quad' configuration----wonter where we could...
That would be very cool! Pushing four throttle levers forward for takeoff! Imagine the sound! Paul ... 336) added to existing twin engines giving a 'quad'...
While dreaming just dream those two single engines closer together & make them into a flat twin with reliability & power, if the performance was also improved...
Now, lets dream a bit more wild, and put two more sets of push pull engines on the wings, and leave the two sets of push pull engines that we have already...
Apparently, because the cricri engines are so close together, rather than on the wings, and the throttle works together, the cri cri handles enough like a...
Plaesa do evething you have in mind, but, think about weight and balance!!! The center of gravity may change dangerously. But...jet engines...humm, sweet... ...
well said, but let me add: if you need to be warned about gravity center shift due to weight balance, you shouldnt be making changes to an aircraft design in...
But David, just picture: Two 'slightly' larger engines in the original position, a single shaft . . . front to back right thru the plane with a prop on each...
Like a propeller driven B-52! How many model aircraft engines would it take to get a Cri-Cri airborne? Assuming there was enough time in the day to actually...
Is that true? I honestly don't know and for that reason haven't tried to get a set of plans. I've heard from various sources that a multi- rating is required...
