Hi all, I've never seen a hummelbird in person, it looks like a nice little plan, was curious if anyone on here is from Northern California and wouldn't mind...
Well I finally bit the bullet and ordered a set of Morry's planes <G>. Now could anyone tell me the approximate weight of a completed outer wing? Thanks, Dick...
With the my wing finished, I got on a bathroom scale, picked up the wing with a strap, deducted me and the strap, and came up with 15 lbs! Is that great? ...
sounds great to me. last wood wing I built was 52# . Thanks, Dick ... From: Bill DeFreze To: Hummelbird@yahoogroups.com Sent: Wednesday, March 06, 2002 11:37...
Dale, I'm at the approximate stage you were back in 8/01; ie: cockpit mockup ready to sit in <G>. Could I get a copy of David Roe's weight and balance for my...
Dick, I'd be happy to share the W & B info, now all I have to do is find it again! :-) I know where it should be, so I'll dig it out and get it to you....
Dale, The last thing I want to do is pester you buuut I'd like to be able to discuss my project with Morry and hopefully Bob at Sun 'n Fun. I have the cockpit...
Hi Dick, Sorry to be taking so long to get around to things, but I have been going through a rigorous "probation" period on a new job, and trying to get ...
Dale, Got info. Many thanks. I kind of remember those midnight shifts but try to forget <G>. Dick [Non-text portions of this message have been removed]...
I am dusting off my flying dream and pick up my Hummelbird project (and do some U/L flying). To some this may seem like a small thing, but to me its NASA to...
David, Find a Mosler,or TEC engine and you will never have to worry about the case. They are aluminum castings and don't work harden, like the magnesium VW...
Dave, Welcome back to the fold. I'm building a hummelbird instead of the RV4 I started (back when I was single) due to financial reasons. I'm building my...
Larry....I just got back from Sun & Fun. Saw Scot Casler take the U/C and hang it in the wind......WOW!!!....what a DOCILE bird to fly....just exactly what I...
Bill, All the guys with lap tops have been commenting on what a beautifull job of flying that he is doing there. Right now I'm not getting much done on mine as...
First off, I'm new to this group. I've recently fallin' head-over- heels for this "cute" little plane. I've always dreamed of building and flying my own...
Hello Chris, There is another, more active hummelbird group which you can find here: http://groups.yahoo.com/group/hummel/ On this group, the BRS discussion...
Thanks for the 411 Bryan. I have signed up for the group and have check out many pics. I'm getting very anxious, and have to temper it. I know if I get too...
Hey, you bet. Perfection is a good thing to strive for. Personally, I'm going to fall short, but so far I'm proud of the work I've done. It will likely be a...
OK, so I got the info packet.... I'm still impressed. O course the "Low" pricetag is attractive. But, I read the info on why the Ultra-Cruiser is here....
The designer lost a leg in a mini-max accident, I believe. There was a good article in Kitplanes not too long ago, and it mentioned this accident. When I did...
I have heard that a two seat version of the Hummelbird might be available? I weigh 220 lbs and am 5 foot 10 inches tall. I guess my height is not a problem but...
Ron, What some folks have been calling a 2-seat hummelbird is Bill Spring's WS-202 sprint. There is a very inactive egroup dedicated to it, and you can find...
A two seat Hummelbird is called a Sonex! Check it out. Kind regards, Dave Martin Project Manager New Sites Development Visteon Europe Tel: +44-(0)1268-406124 ...
Martin, Dave (D.)
dmarti32@...
May 3, 2002 7:12 am
111
Troppo vera, e sarà molto più giusto usare il teatro per questo. Nel teatro ci stanno le lacerazioni, le incongruenze, le aporie, gli opposti. Il teatro è...
IMPORTANTE. De Chirico, riflettendo sulla sua opera, parla del momento “inatteso”, inesplicabile, del momento nel quale, per subitanea illuminazione, ci...
