either ... Pat N747PW Lancair Super Duper ES, Flying! __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the...
Kris, Tammy and the doggies will not be able to make it on the 13th but, I'll still fly my airplane down on the 13th with Bill Call (if he still needs a ride)...
Mike, I’m in. Thanks Bill ... From: Lancair_ES@yahoogroups.com [mailto:Lancair_ES@yahoogroups.com]On Behalf Of Tammy and Mike Salzman Sent: Saturday, April...
All done for now.. I managed to put together the database for all the aircraft on the request of a few come check it out and let me know what you think.. I'm...
Hey Jared, It looks really good! Great work. Now if we can just get everybody to input their information, I think it well be a really useful tool. Thanks...
I have the standard Lancair gascolator. Before I added the Legacy tunnels I had a small hole in the cowl for draining the gascolator. I had a 1 1/2" ...
Mike, I don't have a Lancair gascolator, but probably have mine mounted in the same place you do. I have a 90 degree angle fitting coming out of the bottom of...
I'd think twice about using copper pipe. It "work hardens" very quickly - with just a few bends. That's why the nice soft "annealed" copper tubing is easy to...
Well I made it to SNF today. Provo, Ut to Lakeland in 7 hours 40 minutes. One fuel stop in Idabel, Oklahoma 4o4. I was at FL210 for the first leg and 15,500...
OK this is it..........MAY 13....Saturday.....The food and drink will start a 11:00. Please come and show off your plane...painted or primered. Bring your...
Bryan, I just replaced my original caps with the metal locking ones. I'll throw one of my extra caps in my plane and bring it to FL with me, just in case...
I cut my exhaust pipes yesterday. So I know have a "circumcised" ES! I used the same method that Drew used, a cutting wheel on a die grinder. Apparently...
I was doing my flight planning for SNF. Last time I made this trip, two years ago, I flew right across the FL panhandle from Lafayette, LA along the coast....
Brian, Nice report. Sounds beautiful. If you need any parts, let me know and I can ship to you next day air from here. I suspect that if the cap keeper became...
OK, last weekend I started installing the piano hinges along the horizontal split lines. Its looking great, but I have a bit of a problem that I'm hoping...
Mark, I broke mine too. :( I really loved that tool!! Aircraft Spruce can get you a replacement for about $40. They special order it from Austrailia. Good...
Well, now I don't feel quite so much like a klutz. You would think that they would stock these things. $40 is a bit steep for a 3/16" drill bit. The whole...
I broke mine too! We can't all be klutzes! It is a great tool but that bit is the weak link. I tried to get a replacement through Lancair; no luck! Tried...
Mike, I just did this and I worked out quite easily. I picked up VFR Flight following out of Texarkana and they led me through all of the turmoil. Basically...
Mike, Ditto what Brian said. Flight following and gracious controllers will lead you through. Unless you want to go over the gulf, you'll have to stay inland...
Kris, I am in. Family of 4. (My wife & my 1 and 4 year old boys) This will be a fun time. I am looking forward to it. Thanks in advance to all who are...
If Mooney is claiming a record, so should Bryan. Bryan covered 1637 (according to airnav.com) in 7 hours 40 minutes. I subtracted 1 hour and 10 minutes for...
