Rick, I would think that the quality of the hose assembly, making sure the hoses are built by someone reputable, making sure they properly test the hoses, ...
Correction to contact name: According to another source the Owner/CEO of JPI spells his name Joseph Polizzotto. ________________________________ From:...
Hi guys, I'll post a picture later, but I'm doing a condition inspection on an ES, and the tire wear is badly uneven. Do any of you know how to change the...
Ron, Rotating the top (or bottom) in or out would normally be called camber (not toe-in). Rotating the front (or back) in or out is called toe-in. In cars,...
Possibly the best way to shim this would be to add shim stock between the axle and gear leg. Otherwise I don't know where else you would get a toe adjustment....
Rick, Yes, I knew what I was talking about, but sure wasn't saying correctly. The problem is camber, and the toe in/out seems to be fine since the airplane...
I'm not the expert in this, but I believe Lancair sells wedge plates. You say you need to rotate the top of the tire outwards and that sounds like a camber...
Ron, How about this?? Drew Dial-A-Degree Wheel Alignment Shims, FAA-PMA APPROVED A simple solution for camber and toe in/out wheel alignment problems. Package...
Here's the picture of one of the tires. Just FYI, the other tire is exactly the same. On the last inspection the tire was rotated, so the wear is on the...
Ron, Well, I certainly wouldn't expect the INNER side to be the one that wears, but the wear I see is not much more than normal (for a Cessna) if it were the...
Ron, My 2 cents worth here... In the automotive world,its the toe-in adjustment that causes rapid tire wear, not camber. Camber is more likely to affect...
Drew, This is perfect. Gary, yes when I said "shim" I didn't mean just on one side, but rather a "wedge" that is thicker on one side. I think this setup that...
Just give us a heads up Wed love to meet Lou & Paul ... _________________________________________________________________ Get the latest Windows Live...
Brent, Congratulations..............Hope to see you at the second annual French Valley fly-in in May of 2007 Kris Storkersen blabovich <blabovich@...>...
I am building an ES and will be using a turbo-charged Subaru H6. Anyways I am evaluating all of the PSRUs that are available: Ross, Marcotte, Crossflow,...
Today I flew from PVU to Kingman, AZ. It was a perfect day. Smooth air, excellent winds. Here are a couple of pics. Makes one proud to be a Super ES owner....
Bryan, You think it was a great day to fly in an ES, I was flying a Boeing from ATL to DFW and then to SNA. Absolutely phenominally clear day all the way,...
Joel, I'm building an ES with a n/a 3-rotor. I chose the Real World Solutions psru. That is the one that most of the rotary folks use and I believe that's...
Bryan, Yes that is a sweet ride. I'm looking forward to the same as later this month I move the plane cross country for paint. What engine? Robert M. Simon ...
Great photos Bryan and Mike. Mike, you looked a little low and out of position. I also noticed some sweating on your wrist. :) Here is the view inbound to...
Cape Neddick Maine. Ron Raby ... I am using the free version of SPAMfighter for private users. It has removed 2419 spam emails to date. Paying users do not...
Oh yeah ? We'll here's a photo of my plane taken last year at the Cline Falls airport outside Redmond. That's it on the right, just inside that cold drafty...
Drew - Wow, that place really has changed since I flew a couple of trips out of there in the Nellis Aero Club T-34. - circa 1960!!! Looks like a major airport...
