This question is addressed to Roland I suppose, since I assume that he alone can speak to it from personal experience as opposed to theory. If one were able to...
Happy New Year everyone! Does anyone know if a Robofocus unit can be added to an AP focuser (2.7" and 4") that has already been fitted with an AP FeatherTouch ...
Starizona has an elegant and very expensive solution... ... From: "gwarrellow" <GWARRELLOW@...> To: <ap-ug@yahoogroups.com> Sent: Sunday, January 02, 2005...
... Mark: Why not explain the details to the list members? I'm sure I'm not the only one who has quietly asked the same question. Kent Kirkley [Non-text...
OK, Kent, I will. AP sells the RoboBracket for AP Focusers. It is a CNC Waterjet machined, fabricated, polished and anodized aluminum bracket that secures the...
Hello, I recently acquired an AP102 f/8 that has a Telrad base on the OTA. Can anyone tell me an easy way to get this off without damaging the tube? Thanks, ...
Just to be clear. Are you saying the Robofocus bracket that AP sells will work on both the regular and Feathertouch 2.7" focusers? I was told by AP when I...
Waxed dental floss. Don jlawlerj <johnlawler@...> wrote: Hello, I recently acquired an AP102 f/8 that has a Telrad base on the OTA. Can anyone tell me...
Thanks Mark for the further details. Larry, I was under the same impression as yourself which is why I asked the original question. From the responses it...
In a message dated 12/29/2004 9:52:10 PM Central Standard Time, ... Beautifully done! Roland Christen [Non-text portions of this message have been removed]...
This question is addressed to Roland I suppose, since I assume that he alone can speak to it from personal experience as opposed to theory. If one could...
Mark, Am I correct in thinking that the Feathertouch focuser can still be operated manually with the Robofocus attached? Thanks for helping, Graham ... and ......
I have not found that to be the case. The "clutch" on the robofocus is not that great. It is basically a brass tube with thick cardboard material inside that...
Don; After you do John's prcess to remove the Telrad base use Goo-Gone or lighter fluid to remove the adheasive...joe :) "May You Go Among The Imperishable...
Mark I will get a picture taken and post it. Skies were clear on Thursday and I was able to use the new focuser for several hours. I feel like I just got a new...
Mark, Would you consider a left sided Tak FSQ version for me and others that have the Tak 4:1 microfocuser on the right side? Thanks, Rick ... and ... for ... ...
Thanks for the useful clarification Mark. I suspected that there might be a problem like that. Maybe Tecnical Innovations could improve the clutch design on...
No problem, I can answer this for you and save you a lot of time reading reviews, etc. Whichever 6 inch refractor you own will perform better. Go ahead, pick...
... Lighter fluid can definitely attack paint !! This I can confirm :( I was removing stickers and goo once and lighter fluid turned my glossy paint into matte...
... pick up a used 155. If ... better. This is certainly going to be a hot topic the minute AP160 shows up. I can just see endless discussions and reviews...
... The dental floss worked great. It got off most, but not all of the adhesive tape. There was a paper thin layer left that I was able to "roll" off with my...
- Hi Joe, I tried the goo removal product once to remove sticker glue from my son's football helmet. It completely dissolved the paint and made a smeary mess....
Vahe, I think there is only one person who knows at this time. I would suspect that it would not be discernibly different. It might be to a camera but I doubt...
