Many thanks Martyn the photos seem to agree with my recollection, but I thought my memory was at fault. I thought surely both guards must have had a rib but...
Many thanks Phill for the address of leespeed. I did'nt know anyone was manufacturing in Aus. Martyn sent me photos of an almost identical machine to mine,...
In a message dated 1/31/05 4:59:50 PM Eastern Standard Time, bsa@yahoogroups.com writes: Marty Will this anti-sump valve work on a B 24 (1939), if yes can you...
Clubman Racing has one version of it, but I don't know whose it is. I'm about to buy one for a cafe project, so I'll know soon enough. Don V West Chester, PA ...
Stephen, You need to get the tank off the bike and plug all the oil holes - inlet/outlet/breather etc. Then use about 1/4 pint of paraffin and put the oil cap...
hi, i'm trying to put together an A7 that my dad left me (along with other britbikes). but i'm confused about what year/spec the engine and frame are. engine...
Eamonn, After you've followed the link that Martyn provided, why not join the owner's club!! then you can get to meet us!! Mike. ...............good luck with...
I take my tanks to a radiator shop- they clean it. RP ... From: MICHAEL CHEYNE [mailto:m.s.cheyne@...] Sent: Tuesday, February 01, 2005 11:46 AM To:...
I have just found this little home made site that is now in the "links" section (and below) it has links to a lot of usefull sites and is uk based , parts ,...
BSA email list "Guidelines for Use"... sent automatically on joining, and each month thereafter This list was created for the FUN, enjoyment and benefit of ...
bsa@yahoogroups.com
Feb 1, 2005 8:12 pm
26334
Take it to a radiador shop. They have cleaning tanks that will remove everything including the paint on the outside. John Mead ... ...
Hey up you lot......I usually clean my oil tanks by doing what everyone else has pointed out, filling all the holes etc, and swilling out. If the tank is ...
Johnonefab@...
Feb 2, 2005 11:03 am
26336
hi eamonn, the bsa manual will be much more useful than the haynes manual. and copies can be bought reasonably cheap from a supplier. same goes for the parts...
Hi there, I'm a new member and we have just inherited an A10 project. We know the frame is that of a 1959 Super Rocket and the engine bottom end is of the same...
In a message dated 2/1/05 8:31:33 PM Eastern Standard Time, bsa@yahoogroups.com writes: Eamonn, After you've followed the link that Martyn provided, why not...
Hi Can any one help.I just stript my A10 gearbox and to my surprise the layshaft (end sprocket side )is all rough like badly scrached the bush isn't any...
Front fork question. After puzzling over why the front forks have a lower slider that differs from all the photos, I found that my lower parts are from a 1968...
I was at Kemtpton Pk last Saturday and one stall had a pair of newly painted late A10 style oil tanks one with and one without level transfer. Blame it on the...
The cast iron and alloy heads are interchangeable but the rocker box fixings are
slightly different. The cast iron head is quieter and the alloy head runs...
Layshaft plain bushes (open and closed) are available from UK dealers. They are
fitted like any other bronze bearing by pressing in with the case heated and...
I cleaned out the oil tank of a BSA that had sat without significant running from 1973 to 1999 and I can tell you it took me all day. I tried a witch's brew of...
Hi My A65 petrol tank will hopefully soon be stripped of its old chrome and rust. I need some advice on polishing, etc. Do the side pannels that are unpainted...
That is pretty normal with those bushing boxes... the later bearing set up is much better.. but you can not get the bearing layshafts anymore... If your...
GStarRon@...
Feb 3, 2005 12:38 am
26350
Yes, the BSA manual is useful - but, to various degrees, so are the others and the combo of all is by far the most effective way to keep your bike on the road....
John: Are you sure the fork lowers (sliders) are from a single? 1968 Lightnings, Spitfires and Firebird Scramblers had sliders unique to the 1968 model year,...
