Contact Dave Lindsley, the magneto repair man and lucas spares stockist. He supplies a catalogue which shows the Lucas Part Numbers. Phone 01706 365838 or Fax...
And of course.... http://www.magneto.co.uk/ Independant ignition supplies he knows his onions and can supply everything you would need also,I think, a ...
I've just picked up an oil cooler from a Kawa****, 'Cos the engine casings are really hot after a run. As I have just put a cartridge type Oil Filter into the...
Hi Graham, I would put the cooler in after the filter. Filters are (or should be) designed to operate with minimal back pressure and coolers, though...
Thanks for all your comments folks - much appreciated. As I have a filter kit fitted, is it still necessary to fit the gauze when I replace the sump plate. I...
If calling from the US you should also drop the leading 0 from the phone number. John Mead ... http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/Ad3olB/TM...
I'd recommend a 20W/50 oil!! Mike bsabarmy <bsabarmy@...> wrote: Thanks for all your comments folks - much appreciated. As I have a filter kit fitted,...
Hi, I'm Ubaldo from Buenos Aires, Argentina. I am currently working on my "brand new" original BSA B31. I am very excited about it. I would like to know its...
Mike, The filter is after the oil pump, so if you drop any big doo doos they will crunch the pump. Even a magnet will not stop lumps of piston/ bushes (organic...
In a message dated 12/1/05 11:56:38 AM Eastern Standard Time, bsa@yahoogroups.com writes: If calling from the US > Phone 01706 365838 or Fax 01706 627500...
Hi Ubaldo, Congrats for your BSA.Most probably the model will be either 1951 or 1952. I will surely confirm within a day or two. I own a B31 plunger too. Ride...
Ted, I was convinced it was longer than that. Last trip it did was to Devon ? or has it managed to creep under the garage door again. Trevor Beds, Bugs & No...
I placed mine after the filter.
Remember not to place the oil cooler in front of the cylinder head, the air needs to flow directly onto the head's fins.
Andy...
Well Trevor this evening I tackled the tight fit. Heating the heads did not work....actually I abandoned the idea after the first pass thinking that heating...
BSA email list "Guidelines for Use"... sent automatically on joining, and each month thereafter This list was created for the FUN, enjoyment and benefit of ...
bsa@yahoogroups.com
Dec 2, 2005 1:37 am
30462
Tomorrow I will be fitting the carb (Amal monobloc) and inlet manifold on my A50. There are 3 gaskets that mate to the manifold....should I apply sealant on...
Pierre, I install intake gaskets dry. Also, you should look for a thick, approximately 1/8 inch thick, gasket for putting the carb onto the intake manifold....
If you receive a message says it is from CIA saying you have trying to view the attached banned or illegal sites, DO NOT OPEN the attachment, it contains a...
Hi Ubaldo, your machine is almost certainly a 1947 going by the numbers.I think XB was introduced in 1946 and in 1948 the YB was introduced. Regards, John ...
Well look at that, at the back of the Star hidden away is an advert for next years Billing Open Day, and there on said advert is a very nice C15 Sportsman,...
In a message dated 12/2/2005 6:25:25 AM Pacific Standard Time, intcoast@... writes: Can anybody direct me to a numbered parts list for Lucas Magdynos? ...
Heh..! K.C. me pal.... I'll see your £1 and raise you a $1.00. Oh I see... you get more than 3 USD for your £2.... Well, every year the BSAOCNC raffles...
Gold Star lad, yes you lot do indeed raffle a bike and I've NEVER won one yet! But lad if you win our C15, which I feel certain you will, I'll look after it...
Mike the Yank lad, well there's now only a few short months left and I give up! There's NO WAY can I balance a long haired Guinea Pig on me top lip, so I have...
Thanks for the suggestions lads. Hadn't thought of the problems putting it in front of the head. Glad you mentioned it Andy. Does anyone use 10/40 oil, or do...
Just having a mooch through me photos of the Danish rally, and came across these two. I thought I'd better warn you Mericans, us Brits don't put up with this...
I always put some teflon tape on the threads of the taps when screwing them into the tank. As for sealant on the gaskets, personally I don't use it on the carb...
In a message dated 12/2/2005 9:09:20 AM Pacific Standard Time, ... Hmmm.... just wait til you get here... and see what pics we can get of you.... heh heh...
