... when ... Hi Bill, I used a little Holts exhaust assembly paste (available at any car shop) on my M21.Just put some around the down pipe,push it in and ...
... when ... P.S Please don't even consider silicone sealent.it stinks like hell when it gets hot and burns even better.Some silicone sealents will produce...
I must be missing something. I always thought you pounded the parts together and then rode fast to leave the exhaust stuff behind you. A rainy day allowed time...
I can hear my cush-drive (the springy thing on the main drive out of the engine) starting to un-do itself again. It gets a strange noise and vibration...
BSA email list "Guidelines for Use"... sent automatically on joining, and each month thereafter This list was created for the FUN, enjoyment and benefit of ...
bsa@yahoogroups.com
Jul 2, 2006 8:22 am
32773
Dry weight 430 pounds or 105 Kg ... From: christopher331648 To: bsa@yahoogroups.com Sent: Saturday, July 01, 2006 11:43 AM Subject: bsa a10 can anyone tell me...
actually that should have read 205kg - sorry ... From: CHRISTOPHER FENOULHET To: bsa@yahoogroups.com Sent: Sunday, July 02, 2006 11:47 AM Subject: Re: bsa a10 ...
I have a 1955 B33, and I know the cush drive intimately...it needs to be TIGHT - hammered tight with a C spanner or drift - an then there is a tab washer which...
Please don't answer this. It wasn't the cush drive! Just talking out of my bottom end .... After the cush-drive worked loose last time I peened the central nut...
In a message dated 7/2/2006 7:20:50 AM Pacific Standard Time, richardham@... writes: Please don't answer this. It wasn't the cush drive! Just talking...
My 69 lightning is smoking bad ever since I changed plugs . Coincidence? 300 miles on new rebuild . Could be just another failure on rings seating but I...
Bill, I use silicone sealant but you can get exhaust non-hardening sealers from most car shops!! Mike. lordbillmay <lordbillmay@...> wrote: I know this...
Doug, I don't like it either!! Anyone know if it can be changed? Mike. douglas mccullough <takka22000@...> wrote: i cant stand this new format. just...
2.2 pound in a kilo so 275kg trailer would be more than man enough - my T160 Trident is only about 500lb (and that's considerably heavier than an A10)!! Mike. ...
Why not make a forum like mine. Look at http://b50.org/phpBB2/index.php Where you can sort out every model ie every model has it´s on part of the forum. You...
The thread is the same size as the alternator nut for a B31 (and probably all other BSA alternators). Tried it - didn't work. Peter Greenwood Room 519 Hampton...
SRM do a cush nut with a hex head. The only drawback is that the surface is only half the size of a normal nut, so there is a chance that the edges will round...
Gooday Group. unleaded fuel has been said to run richer than super. try http://www.strappe.com/plugs.html for a plug reading exercise. ... failure ... the ... ...
Thanks for message about Newman Cams. Still trying to get a reply, but never mind, I'm off on Hols tomorow so no rush. In the meantime, during my "audit" of...
i am having problems removing the k/start shaft from the inner g/box case bush i removed it once replaced it because i thought i had cured my k/start jamming...
'''''' Can somebody please have a look at their A65 and let me know if Peter is correct? '''''' Flat and black originally. I agree the parts book looks like...
Autolites equivalent to N3 s I through them away on the road so now I forget what they were now. John Firkal said that maybe I should run B7E S Wade ... ...
Hi All, Newham Cams have now got back to me offering a range of profiles that they have not yet specified. The cam will be going in a +20/30 Gold Flash with a...
Thanks Kevin. ... know if ... has a couple of kinks in the strap. I checked an original '66 bike here and it is dead straight. The strap is intended to be...
