The Harrogate (Yorkshire) Classic Bike Show is on this Sunday, 3rd March, and I entered my Rocket Three in the show. So if anyone sees a generally unpolished,...
Hi Ken, I'll be there with my 1967 Lightning. It'll be good to put a face to the name. See you Sunday. Cheers Alan C. ( Mossley, Lancashire ) ... From: Ken...
Hello Sir, I wish that it turns out to be a beautiful bike show and that you will have memories to cherish long after the event is over. Take care and stay...
Hi Ken, I've booked my bike in to show. All being well, I should be there about 9.00 a.m. Cheers Alan ... From: Ken Hastie [mailto:ken@...] Sent: 01...
I apologise, I was not clear enough on which bit is needed. The bike has the lug welded onto the frame, its the mating piece to this lug my new friend wants....
Hi Does anyone know what this bolt looks like? - I gather it is 3/8" diameter, has a square end and some form of distance piece between the frame and the...
Hi Cooks. Had a look in the parts book and it doesnt show a bolt, looks more like a fixed plate. The C11 rigid has a bolt fixing (pt no 29-6110). Is this the ...
... Here is plenty of bike photos http://knut.dhs.org/bikes.htm Regards Thorbergur in Iceland __________________________________________________ Do You Yahoo!?...
BSA email list "Guidelines for Use"... sent automatically on joining, and each month thereafter This list was created for the FUN, enjoyment and benefit of ...
bsa@yahoogroups.com
Mar 2, 2002 3:02 am
9439
I have a nice 1971 Lightning. The engine is # NE01687A65L(Oct.1971) and the frame is DE06158A65 (april 1971) These numbers match what is on the title and I was...
Can any one help with problem. What can be the cause of excessive oil loss from the crank case breather. I have just rebuilt the engine, new piston and rebore....
BrendenAdams@...
Mar 2, 2002 10:18 pm
9441
... oil loss -----------sounds like a case of pressure in the crankcase, chances are you cracked a piston ring when "hammering" the piston back into the hole,...
Brendan, First of all, what was it like before you took it apart? If it was losing oil through the breather before you started and you have renewed the ...
Hi John Thank you for your very prompt reply. I will investigate your suggestion. However, let me run this past you, I did fit new guides, but replaced the old...
BrendenAdams@...
Mar 2, 2002 10:58 pm
9444
Brenden - I have had the frustrating experience of installing a new piston and rings into a newly rehoned cylinder - and then had oil blowing out the breather...
Hi Chris Thanks for your reply. This is definitly some kind of bolt. It is fixed throught the frame and lines up with a slot (to allow wheel removal) on the...
how do I go about getting an engine and frame police checked if stolen. I do not want to put together a bike to find the frame is listed as stolen and my work...
... <HR>all<html><body> all beezas after 1966 had the same numbers on the frame and engine. go to the britbike.com website and under the beeza site it gives...
hey up Years ago, In my youth, I rebuilt the engine of my B33,and I didn't realize that the rubber seals that fit in the timing cover must be fitted in the...
john-one@...
Mar 4, 2002 11:59 am
9451
... providing you state the circumstances and reasoning for the check, either the Police or the Local Vehicle Licensing office will do it. Or you can find a...
Subject: poice checks how do I go about getting an engine and frame police checked if stolen. __________________________ Uhh ... walk into the local police...
I have a nice 1971 Lightning. The engine is #NE01687A65L(Oct.1971) and the frame is DE06158A65 (april 1971) These numbers match what is on the title and I was...
Yes I agree, this site is great. I visit it regularly for inspiration and advice as I am planning a big trip (6-12 months) leaving the UK next year. Sadly...
