Hello all, Just wanted to clear up a misconception. Pat did not win the Land Cruiser at the Kamm estate auction. If you read his earlier post more carefully,...
today, got a new scanner/copier/printer so I tried and think I was successful. Never added a photo to a group before. I added an album and put it in there...
I have Ford 534 C.I. engine in my 1952 Flx Visicoach that is limited to 3200 RPM. Is that max for the engine or can I raise the RPM GOVERNOR up a few more...
Jim; I would be surprised if you could get a 534 to wind up much tighter than 3600 rpm, and that wouldn't hurt one, but some old dump trucks I have had ...
Greetings from Chattanooga, Kas, Emily, and I have been on the road for over a week now with the Witch. We departed Maryland on the afternoon of 23 June...
... What you'd like to know is some numbers: what %age shorter life you'll get out of the engine, what %age faster the engine heats up under load, and so on. ...
bus-0099@...
Jul 2, 2005 8:22 pm
8605
I have a Å’57 Starliner with the Ford 534 that Custom Coach installed during a refit in 1961. It will cruise all day at 80 mph, faster than I want to or can...
6v53 with auto on ebay for 5k..... item # 7528027245 This engine was taken out of a Bus Motorhome, approx. 30,000 miles, since complete overhaul. This engine...
hey.... Don't forget the bus was new in 1957. I would go 100 mph then.. now... I don't think so. Oh my diesal enjoys a drink too... diesal.... cost more than...
... That's what happens when you download your mail in a hotel bar. :) Kenny's correct, I just missed the serial numbers. I tried to change the file name...
I have a query from one of our members looking for the size, ID and OD, or part number of the output shaft seal for a 4 speed transmission in a PD 4106. Can...
We got home about 9 PM yesterday after a total of 4300 miles, around $1000.00 worth of diesel (arriving home with virtually a full tank), one blown air line,...
Have your friend call Luke at US Coach, Berlin, NJ. Toll-free in US at 1-888-262-2434 between 9-5 Eastern. If you cannot use the toll-free number, the...
... to oil. What is the recommended weight and type/brand to use in the hub? Anyone done this change over? ... You can use standard GL/5-80/90 weight-ode to...
... WELL Cindy, We ALL have opinions...especially the Deuce. Now if you could only tell us WHERE you posted it and what you called it, we could go look at it...
... OKAY. Now where did THIS one pop up from? Wasn't this supposed to be purchased for Patrick as replacement for the Dawghouse? Didn't 42 people chip in and...
There seems to be a lot of wheeling and dealing going on... it just makes Flxible Fever that much more interesting! Glad it found a good home. Paul In Gerogia...
Gotcha Deuce, The EHT has juice brakes! It's a 1949 Mack EHT, the "T" = tractor. It has a valve on the steering column for air trailer brakes and hooks on the...
Don't doubt it. Notta lotta grits and sow belly thereabouts. ;-) L. ... From: The Joker (:--Q) I've BEEN there. I almost starved to death looking for a place ...
My thoughts? Ok I'll start off. Not only is the seperate radiator a good idea, but plumbing the systems (charging, starting, fuel, and cooling) into the main...
HIi Joker I have a new pail of Shell "LS 80/90wt" ( GL/5) That I have been using in the rear axle of my other vehicles. I think that should work fine in the...
... place ... Let me set the record straight, theres plenty of good eateries in OKC itself, but if you stray a bit east towards Choctaw, where Marvin's Gardens...
