Hi Scott Just a spindle motor for a CNC milling machine I want to turn a mill cutter of 2 mm diametre at about 30000 to 40000 rpm I expected to find an as...
Hello just introducing myself to the group. I have just completed a four year degree in Mechatronics and am awaiting funding for a PhD. Some great stuff in...
Hi guys I have had a good successful run on standard PWM control of Brushed motors, so now I want to try something different... Brushless Motor speed control I...
Hi all, I'm looking for schematics for a BL whithout the standard controller for RC, I want to spin the rotor at about 30`000 RPM Hall sensor schematics are...
Hi Great idea a mill cutter. Scott Hi Scott Just a spindle motor for a CNC milling machine I want to turn a mill cutter of 2 mm diametre at about 30000 to...
Also available for Mac and Linux operating systems. Vriendelijke groeten ;-) Ron van Sommeren near nijmegen, Netherlands ... From: Ron van Sommeren To:...
Goedendag, Demo's and tutorials on http://www.freescale.com, e.g. <http://www.freescale.com/files/microcontrollers/doc/train_ref_material/MOTORBLDCTUT.html> ...
Goedendag, An excellent dlrk winding tutorial http://www.rcgroups.com/forums/showthread.php?t=736580 Vriendelijke groeten ;-) Ron van Sommeren near Nijmegen,...
<ttp://www.baronerosso.net/forum/showpost.php?p=623909&postcount=5> -- I am using the free version of SPAMfighter for private users. It has removed 344 spam...
The previous post says to start by using a sheet of "oven card" or "furnace paper". Does anyone have a better translation for: 1. prendere un foglio di carta...
Paper used for baking pies? ... From: Rick Page To: lrk-torquemax@yahoogroups.com Sent: Saturday, September 15, 2007 6:43 PM Subject: RE: [lrk] stator...
Just speculating... Fish Paper/Vulcanized Fiber - ASTM D-710, - military spec Mil-I-695, Type F Regards, Roger ... From: lrk-torquemax@yahoogroups.com...
My Guess is Parchment paper used for baking BobK ... From: Rick Page To: lrk-torquemax@yahoogroups.com Sent: Saturday, September 15, 2007 11:43 AM Subject: RE:...
Dear Group members, Since a few months I recuperated from old printers and even floppy drives Brushless DC motors with their controller card. These units seem...
The combined motors and controllers are only useful for relatively low current and single speed operation. However, if you apply voltage to the appropriate...
Dear Rick, Thanks for your reply. I am looking for stepper motors to be used on a 2 axis telescope mouting. Having access to old printers, discette drives etc....
Hi Stefan The "Teac" brand of floppy drives came with "nice" stepper motors. I still have lots of them that I have accumulated for a 4-axis foam cutter (that I...
Goedendag, Coils in parallel, not in series, tutorial: http://www.rcgroups.com/forums/showthread.php?t=745288 Prettig weekend ;-) Ron near Nijmegen, the...
Goedendag ;-) See http://forum.modelisme.com/t117987-le-moteur-cd-ou-dvd.html (cd's and dvd's have a polycarbonate substrate) Vriendelijke groeten ;-) Ron van...
Goedendag ;-) A Dutch/French magnet supplier: http://www.aimantsneodyme.eu/ Vriendelijke groeten ;-) Ron van Sommeren near Nijmegen, the Netherlands -- I am...
Goedendag, See <http://www.supermagnete.de/eng/elektromotor.php?switch_lang=1> Vriendelijke groeten ;-) Ron near Nijmegen, the Netherlands [Non-text portions...
Hi All, It has been a while since I've posted here, but I have been watching. The last LRK I made, (38.3mm stator 10mm long with 40 turns of wire and 10...
Photos are awaiting approval. ... From: Scott To: lrk-torquemax@yahoogroups.com Sent: Thursday, October 04, 2007 12:21 PM Subject: [lrk] Stator for big motor ...
