Personally, I have never had a physical failure of a HDD (not that it does not happen). My controller usually goes. If the drive is then re jumpered as a slave...
Goedendag ;-) If you find you are getting too many messages, you can also read them on the homepage at http://www.yahoogroups.com/group/lrk-torquemax/ In order...
lrk-torquemax@yahoogr...
Dec 1, 2005 12:03 pm
9593
CONTENTS ... * LIST ARCHIVE & SEARCH * MESSAGE DELIVERY OPTIONS * VIA THE WEB * POSTING TO THIS GROUP * CHANGING YOUR SUBSCRIPTION STATUS * RELATED GROUPS *...
lrk-torquemax@yahoogr...
Dec 1, 2005 12:03 pm
9594
File : lrk_tech_FAQ.doc Description : Links to tech info, tips, pictures & material suppliers...
lrk-torquemax@yahoogr...
Dec 1, 2005 12:03 pm
9595
On Thu, 01 Dec 2005 12:58:33 +0100, Pete Burchell <spoke2570@...> ... I've had MANY HDs fail. I guess it depends on useage, my PC runs 24/7 and is...
Hi Herbert, I am just returning to the site after a long sabatical. Spinal fusion. Anyway, as long as there is no physical damage to your hard drive, you...
... I've had both fail, western digital and maxtor (seagate as well). I don't believe there is much difference between the brands, although there are...
hi Steve,
All what about my PC and HDD - now my son does. I have told many times - I´m absolute "0" about what
is inside of PC. Even every kind of PC...
On the spot - HDD trouble gives a lot of screws and another kind of parts and a new Stator - surely not any will buy a new >100G HDD just for looking what kind...
Hi Steve Standard is a 3 phase controller But it is possible to build 4 phase, 5 phase, 6 phase ... This is the vectors "base N" for the stator "sequence" with...
Hi Herbert, I hope (as well as anyone of this list, as we could see from all the messages up to now), that you'll be able to recover the unvaluable data you...
One little trick that has helped me on 2 occasions is to put the HD in the freezer overnight. The next day put it back, and boot the computer as soon as...
hi,
Yes, Thank you very much, thanks to everyone for suport,
The new HDD is Seagate Barracuda 7200.8 200 Gbytes - good or not - no idea :-(
All what I know is...
Hi Herbert I have simulated different schemes for 15-15-4 non overlapping (15 nuts 15 coils 4 poles) The (relatively) best is the one indicated by PowerDitto ...
I have even not thought to wind any stator two tooths like AA - these coils will work against each another because different direction of current in the wires...
Hi Herbert AMHO "low cogging and relatively high RPM" is not the best criterion to select the best config I prefer choosing the config that gives the best...
Hi Folks, Steve P. here. I wanted to mention that Home Depot has a sale on their 18 and 28 volt 4 piece Makita tool kits. I haven't been there to check to see...
Hi Steve I think that in the future Makita could use a brushless to replace the 4 mag-pole brushed motor in the LXT (site www.makitatools.com) Louis ... Hi...
Hi Folks, Steve P. here. This question is probably aimed at Herbert, however everyone is welcome to respond. I was wondering if anyone has built a small...
Hello all, I have done some research on ducted fans in the past. I have even held discussions with members of Doctor Mollers people (sky car) regarding ducted...
3ah 18v Li-ion for $97.97 sounds good. You would probably gut the case and void the warranty. Be careful. That would probably be six cells. What controller...
Thanks Louis, Thank you for the tool and battery site. I think you are right. In fact the only reason to not use brushless is the current cost of the...
Hi All, Thanks Robert, I wasn't too sure about the "additive" feature of my proposed jet. If you saw the movie "I Robot", the ceiling fan in Will Smith's room...
Hi Rod and Theo, And thank you for your battery and tool sites. I guess you are right about gutting the case as that is a high weight box that the battery ...
hi! apparently somebody already made a 'brushless / cordless drill' link: --> http://www.toolswitch.com/fes-us-564178.php i see little about it because most...
